48V BLDC MOTOR：
Model Number: TP-120
Usage: Electric rickshaw
Type: Gear Motor
Torque: 120N.m - 320 N.m
Construction: Permanent Magnet
Commutation: Brushless
Protect Feature: Waterproof
Speed(RPM): 3100rpm - 3400rpm
Continuous Current(A): 20A - 30A
Output Power: 500W/800W/900W/1000W
48V BLDC MOTOR:
High loading capacity，High reliability,strong overload；capacity,good regenerative braking effect
The best manufacturing technique
Q:Motor has been running then fails to start,what to do?
A:Likely cause: Fuse or circuit breaker is tripped.
What to do: Replace the fuse or reset the breaker.
Likely cause: Armature is shorted. Motor may make a humming noise and the circuit breaker or fuse will trip.
What to do: Disassemble motor and inspect the armature for a burnt
coil. Inspect the commutator for burnt bars. If this condition exists,
the motor needs to be replaced.
Likely cause: The brushes may be worn down too far and no longer make contact with the commutator.
What to do: Check the brushes to make sure that they are still
making contact with the commutator. Contact manufacturer for brushes.
Likely cause: Controller may be defective.
What to do: Verify voltage is coming out of the controller.
Hot Tags: 48v bldc motor, China, manufacturers, suppliers, factory, wholesale, 850W BLDC Motor, electric scooter feedback, industrial motor controller, DC Motor, refrigeration compressor motor, ceramic heater motor