48V BLDC MOTOR:
Model Number: TP-120
Usage: Electric rickshaw
Type: Gear Motor
Torque: 120N.m - 320 N.m
Construction: Permanent Magnet
Commutation: Brushless
Protect Feature: Waterproof
Speed(RPM): 3100rpm - 3400rpm
Continuous Current(A): 20A - 30A
Output Power: 500W/800W/900W/1000W
48V BLDC MOTOR:
High loading capacity,High reliability,strong overload;capacity,good regenerative braking effect
The best manufacturing technique

Q:Motor has been running then fails to start,what to do?
A:Likely cause: Fuse or circuit breaker is tripped.
What to do: Replace the fuse or reset the breaker.
Likely cause: Armature is shorted. Motor may make a humming noise and the circuit breaker or fuse will trip.
What to do: Disassemble motor and inspect the armature for a burnt
coil. Inspect the commutator for burnt bars. If this condition exists,
the motor needs to be replaced.
Likely cause: The brushes may be worn down too far and no longer make contact with the commutator.
What to do: Check the brushes to make sure that they are still
making contact with the commutator. Contact manufacturer for brushes.
Likely cause: Controller may be defective.
What to do: Verify voltage is coming out of the controller.
Hot Tags: 48v bldc motor, China, manufacturers, suppliers, factory, wholesale, 1000W 60V 20AH Electric Scooter, home fan quiet operation motor, electric scooter connectivity features, Citycoco Scooter, direct drive electric scooter, motor control replacement

