1. What is the driving ability of an electric scooter?
In the case of electric scooters without electric power, the pedaling distance of the pedaling function for half an hour should be no less than 7 kilometers.
2. What is the mileage of the electric scooter?
The mileage of an electric scooter is generally determined by the battery to be equipped. The 24V10AH battery pack generally has a range of 25-30 km, and the 36V10Ah battery pack has a typical range of 40-50 km.
3. What is the maximum driving noise of an electric scooter?
Electric scooters are driven at the highest speed at a constant speed, and the noise is generally no more than 62db (A).
4. What is the power consumption of the electric scooter?
When an electric scooter is riding electric, its power consumption of 10Okm is generally around 1kw.h.
5. How to judge the battery's power?
Each battery electric scooter is connected with a battery power indicator. According to the indicator light, the battery can be judged. Note: The smaller the discharge depth of the battery is, the longer the battery life will be. Therefore, no matter how large the battery pack is, it is necessary to develop a good habit of using it.
6. Where is the position of the riser safety line adjusted?
When adjusting the height of the handlebar, be careful not to expose the safety line of the riser to the outside of the front fork lock.
7. Where is the position of the saddle tube safety line adjusted?
When adjusting the height of the saddle, note that the safety line of the saddle should not be exposed outside the rear joint of the frame.
8. How to adjust the brakes of the electric scooter in place?
The front and rear brakes must be flexible and can be quickly reset by the spring force. After the brakes, the gap between the brakes and the sleeve should be left at a finger distance. The brakes on both sides are parallel to the rim of the brakes. The left and right deviations are consistent.
9. How to check if the brake power-off device is in good condition?
Hold the bracket, open the electric door, rotate the right turn, start the motor, and then gently hold the left brake lever, the motor should be able to power off quickly and gradually stop rotating. At this time, if the motor can't be powered off, stop the drive and ask the professional to repair it before use.
10. What should be paid attention to before and after the front and rear wheel inflation?
Inflating method: After the air is charged to a certain air pressure, the rim is rotated and the tire is evenly tapped by hand, and then the inflation is continued to make the tire and the rim match, so as to avoid the phenomenon of slipping tires during riding.