In the blink of an eye, the north is already cold in the winter. Although many friends have given up on electric cars because of the cold. However, there are still some friends who, for various reasons, still use electric cars to travel in winter. Then you must know the three precautions for winter maintenance of carbon fiber scooters in order to protect your car.
First, the winter electric car should be maintained
Although the winter wind is biting, you must check the electric car before going out. Because of the regular maintenance in winter, it is very important for electric vehicles.
1, First of all should pay attention to check whether the electric bicycle accessories are good, such as whether the tire pressure is sufficient, whether the front and rear brakes are sensitive, whether the vehicle has abnormal noise, whether the screws are loose, and whether the battery is fully charged.
2, In case of rain and snow, can not let the water flood the hub center, in order to extend the life of the battery, motor. After the rain and snow, the maintenance of electric vehicles should pay special attention.
3, Should also be lubricated and refueled in winter. Wipe and lubricate the front axle, rear axle, center axle, flywheel, front fork, and the pivot point of the shock absorber of the electric vehicle.
Second, the winter should be charged
Electric bicycles should develop the habit of charging on the same day. In the winter, the battery has a problem of poor charging acceptance and insufficient charging.
The best ambient temperature for battery charging is 25 degrees Celsius. Every time the temperature drops by one degree, the electric vehicle battery power will also drop by 1%. Therefore, in the cold winter situation, it is necessary to increase the charging voltage and extend the charging time, and take measures of heat preservation and antifreeze, so as to ensure sufficient power and extend the service life of the battery.
Third, the winter riding more power
When the electric vehicle is just starting up, it should be slowly accelerated to avoid damage to the electric bicycle accessories in an instant. Under the premise of ensuring safety, braking and starting should be minimized during driving to save energy. When the brakes are running, the speed control should be released to avoid damage to the motor and other electric bicycle accessories.
In the case of heavy loads such as uphill and top wind, use the pedal to assist. When getting off the vehicle, the power should be turned off to prevent the unintentional turning of the speed control during the implementation. The car suddenly starts to accident.
As long as you pay more attention to the above three aspects, the life of your electric car will be greatly extended. Naturally, your trip will be more convenient.