How to install the electric car battery? How to install electric scooter battery? In fact, the battery of the electric car is very well installed. In short, it is just a matter of connecting several batteries directly in series. It takes 3-5 hours to get ok. Electric scooter manufacturers share with you the installation method of electric vehicle battery:
In fact, as long as you open your own electric car battery box, you can see that there are 3 or 4 batteries in your battery box. This battery is generally 12v, so if your electric car is 36v, it is usually 3; if it is 48v, it is generally 4. Then connect the three or four batteries in series with the wires. Generally, the red is positively connected to the black negative electrode. In less than 5 minutes, four batteries can be connected in series.
However, when you are in series, you must remember: you can't connect the same 12v battery to your own positive and negative poles, so that the battery will burn.
In addition, the following are the electric vehicle battery installation tips for your reference:
1. Before installation, check whether the battery is damaged or leaking, and clean the surface of the battery with a dry cloth. If the battery case is broken and leaks, replace the battery immediately to avoid acid corrosion.
2, The battery should be installed upright, can not be inverted, the spacing between adjacent batteries is greater than 2 mm wave, at the same time to be shockproof, anti-pressure, installation is firm, can not be used in the impact, rubbing each other, can not enter the water.
3. In order to ensure safe use, the battery box for installing the battery must have a ventilated vent hole, and must not be blocked to prevent the gas generated by the battery from accumulating in the battery box.