On September 3, 2016, the "Electric Scooter Production Standard" and "Electric Balance Vehicle Production Standard" produced by Shenzhen Longhehai Technology Co., Ltd. were in compliance with the relevant national standards and published on the enterprise standard information public service platform and filed for record. The release of "Electric Scooter Production Standard" and "Electric Balance Vehicle Production Standard" is conducive to balancing the standards of the vehicle industry production standards, is conducive to the sharing of information resources within the car companies, and is conducive to the stable development of the car industry, but also for the country. The supervision work provides a strong guarantee.
So far, the development of the scooter market has always been chaotic. As consumers do not have a clear standard to judge whether the products they purchase are in line with national production standards, this standard is out, so that consumers have their own products. The judging criteria also give the user of the scooter more confidence in the products used.
Take the Dragon River! Adhere to quality, do a good job, reasonable structural design to enhance product performance, excellence in detail, respond to national development strategies, control the direction of the industry, and lead the industry!
Excerpts from "Electric Scooter Production Standards":
1. This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of electric scooters. This standard is applicable to electric scooters and electric assist bicycles for non-motorized roads that use battery as the power source and are driven by DC motors for adult leisure, entertainment and transportation.
2. Braking performance: When the electric scooter is riding at the highest speed for electric uniform speed, the dry braking distance should be no more than 4m, and the wet braking distance should be no more than 15m.
3. Electrical installation: The electrical system of the electric scooter should be installed in place with correct polarity. The wiring device of the system should meet the requirements of 6.2.8.1 of GB17761-1999. The electrical wiring should be adapted to the current amount to ensure electric riding. It is safe and reliable.
4, Undervoltage, overcurrent protection
The electric scooter controller should have undervoltage, overcurrent protection and short circuit safety. The speed regulation should be stable and reliable during electric riding.